Starting from: $459

Promotion

Honda – Too great to wait!

Honda – Too great to wait!

Offer end October 31, 2024.

Specifications

  • Manufacturer: Honda
  • Model: Trimmer Attachments UMC425LAC1
  • Type: Trimmers
  • Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
  • Honda Engine Model: GX25T
  • Displacement: 25 cc (1.53 CID)
  • Bore & Stroke: 35 x 26 mm (1.4 x 1 in.)
  • Maximum Net Torque: 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
  • Idle Speed: 3,100 ± 200 RPM
  • Max. No-Load RPM: 10,000 RPM
  • Ignition System: Transistorized magneto ignition (electronic)
  • Spark Plug: CMR5H (NGK)
  • Cooling System: Forced air
  • Starting System: Recoil starter
  • Stopping System: Ignition primary circuit ground
  • Carburetor: Diaphragm type w/ fuel pump
  • Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
  • Fuel Capacity: 0.53 L (18.7 fl. Imp. oz.)
  • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
  • Clutch Size: 54 mm (2.125 in.) Diameter
  • Clutch Engagement: 4;200 ± 200 RPM
  • Air Cleaner: Semi-dry type
  • Lubrication System: Oil mist
  • Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
  • Recommended Oil: SAE 10W30 API service classification SJ or later
  • Overall Length (without attachment): 113.5 cm (44.7 in.)
  • Overall Width: 31.5 cm (12.4 in.)
  • Overall Height: 24.5 cm (9.6 in.)
  • Dry Weight (without attachment): 5.1 kg (11.2 lbs.)
  • Handle Type: Loop
  • Throttle Control Type: Two-motion trigger type
  • Engine Stop Switch: Slide type switch
  • Drive Shaft Type: Rigid Steel
  • Shaft Support: Rubber Mounted Bushings (4)
  • Main Pipe Diameter: 24 mm (0.94 in.)
  • Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
  • Shoulder Harness: Standard
  • Safety Goggles (A.N.S.I Std.): Standard
  • Blade Barrier Kit: Standard