Price: $429

Overview

  • Condition: New vehicle
  • Manufacturer: Honda
  • Model: HHT25SLTC
  • Version: LOOP
  • Stock #: SKU-00713
  • Type: Portables
  • VIN: HAFA 1138511
  • Engine: GX25
  • Engine Capacity: 25.0 CC
  • Cylinders: 1
  • HP: 1.0
  • Fuel: Gasoline
  • Weight: 13.00 lbs
  • Length: 74.00 ft

Specifications

  • Engine Type: Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
  • Honda Engine Model: GX25
  • Displacement: 25 cc (1.53 CID)
  • Bore & Stroke: 35 X 26 mm (1.4 X 1 in.)
  • Maximum Net Torque: 1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
  • Idle Speed: 3,100 ± 200 RPM
  • Max. No-Load RPM* (Requires Blade Barrier): 10,000 RPM
  • Ignition System: Transistorized flywheel magneto (electronic)
  • Spark Plug: CMR5H (NGK)
  • Cooling System: Forced air
  • Starting System: Recoil starter
  • Stopping System: Ignition primary circuit ground
  • Carburetor: Diaphragm type w/fuel pump
  • Recommended Fuel: Regular unleaded gasoline (87 Octane)
  • Fuel Primer: Anti-flood type
  • Fuel Capacity: 0.5 L (17.6 fl. Imp. oz.)
  • Fuel Consumption (approximate)**: 0.5 L/hr (0.11 Imp. gal./hr)
  • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
  • Clutch Size: 54 mm (2.125 in.) Diameter
  • Clutch Engagement: 4;200 ± 200 RPM
  • Air Cleaner: Semi-dry type
  • Lubrication System: Oil mist
  • Oil Capacity: 80 cc (2.82 fl. Imp. oz.)
  • Recommended Oil: SAE 10W30 API service classification SJ or later
  • Overall Length With Cutter Mounted: 188.5 cm (74.2 in.)
  • Overall Width: 34.5 cm (13.6 in.)
  • Overall Height: 26.5 cm (10.4 in.)
  • Dry Weight (Without Blade): 5.9 kg (13 lbs.)
  • Handle Type: Loop
  • Throttle Control Type: Two-motion trigger type
  • Engine Stop Switch: Slide type switch
  • Cutting Head (Standard): Semi-matic line feed nylon (tap-and-go)
  • Cutting Head (Optional): Manual, pro-tap, semi-pro
  • Cutting Width: 43.2 cm (17 in.)
  • Line Type: Quiet LineTM
  • Cutting Line Diameter: 2.41 mm (0.095 in.)
  • Anti-Vibration System: Standard
  • Drive Shaft Type: Flexible steel cable
  • Final Drive Gear Case: Helical cut bevel gears / Sealed ball bearings
  • Gear Ratio: 1.235 Input shaft: 1 (Output Shaft)
  • Main Pipe Diameter: 25.4 mm (1 in.)
  • Main Pipe Thickness / Material: 1.5 mm (0.06 in.) / Aluminum
  • Trimmer Guard With Cutter: Standard
  • Steel Blade Guard: Optional
  • Shoulder Harness: Standard
  • Professional Double Loop Harness: Optional†
  • Safety Goggles (A.N.S.I Std.): Standard

Notes

Notes:

GX25, Tap & go, Straight Shaft, Loop Handle, Ultra Quiet Line, Safety Goggles & Shoulder Harness Std

Warranty:

36 MONTHS

Promotion